Ring On Transfer (#119) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Ring on Transfer (#119)

Description
This System Programming procedure lets you specify what callers hear while they
are being transferred. If Ring on Transfer is set to Active, callers hear ringing as
they are being transferred; if it is set to Not Active, callers hear silence unless
Music On Hold is activated and an audio source is connected to the system. If this
is the case, callers hear music while the call is being transferred to the destination
extension. Once there, callers hear ringing until the call is answered or it is sent to
the voice messaging system.
Related Features
If you have an audio source connected to the system, set Music On Hold
n
(#602) to Active and Ring on Transfer to Not Active, so callers hear music
as they are being transferred to the destination extension.
This procedure has no effect on Direct Extension Dial or Call Park.
n
Valid Entries
1 = Active 4
2 = Not Active
Programming
(See Figure 2-3 on page 2-23
s
such as and
To change Ring on Transfer:
1. Press
2. Press
3. Select another procedure or exit programming mode.
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 1 1 9
at extension 10 or 11.
D
until the appropriate value displays.
5-225
Feature Reference