Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 104

Fax
Line A
Figure 4-8. Single Fax Machine
To Use
The fax machine automatically answers all calls that come in on the fax line. If a
call comes in on another line, you can transfer the call to the fax extension (see
''Transferring a Call to the Fax Machine'' on page
a Fax Management button, you can transfer a call to the fax machine with a single
touch, as well as monitor the status of the fax machine (see
Management Feature'' on page
When you send a fax, the system automatically selects the fax line.
To Program
1. If extension X is a key extension, use Line Assignment (#301) to assign
only line A to extension X.
If extension X is a pooled extension, use Pool Line Assignment (#207) to
remove line A from all pools and then use Line Assignment (#301) to
assign only line A to extension X.
2. Set Automatic Line Selection for extension X to select line A only. Set
Automatic Line Selection to select line A last on all other extensions or
remove line A from all other extensions if they should not use it to make
outgoing calls.
3. Set Line Ringing for line A on extension X to Immediate Ring. On all other
extensions, set line A to Delayed Ring or No Ring.
4. Set Automatic Extension Privacy (#304) for extension X to Assigned.
5. Make sure extension X is not assigned as a Call Waiting (#316) extension,
Pickup Group Extension (#501), Calling Group Extension (#502),
Night Service Group Extension (#504), or Hunt Group Extension
(#505).
CONTROL
UNIT
Ext
X
FAX
4-17). If you have programmed
4-16r).
Using Auxiliary Equipment
''Using the Fax
4-19