Abbreviated Ringing (#305) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

2. Enter the extension number to which the auto attendant is connected. For
example, to select extension 27, press
3. To assign or unassign the extension, press
value displays.
4. To assign or unassign a second auto attendant extension, press
p
Step 3.
5. Select another procedure or exit programming mode.

Abbreviated Ringing (#305)

Description
This feature applies only to system phones.
This System Programming procedure activates or deactivates Abbreviated
Ringing at the system phone at a specific extension. When a user is on a call and
Abbreviated Ringing is Active, any incoming call rings only once. The green light
next to the line or pool button flashes until the call is answered or the caller hangs
up (or for a transferred call, until it returns to the transfer return extension). This
feature prevents incoming calls from distracting users when they are busy on
another call. To allow calls to ring repeatedly, set Abbreviated Ringing to Not
Active.
Considerations
Abbreviated Ringing is typically set to Not Active for receptionists and
others who handle many calls quickly, so they have an audible reminder of
incoming calls.
Abbreviated Ringing applies to outside, transferred, and intercom calls.
The volume of an abbreviated ring is lower than a normal ring.
Calls to a busy extension ring at a lower volume than normal even if
Abbreviated Ring is set to Not Active.
Valid Entries
1 = Active (incoming calls ring once)
2 = Not Active (incoming calls ring repeatedly)
until the extension number shows on the display. Then repeat
2 7
.
D
until the appropriate
Feature Reference
n
or
5-7