Special Dialing Functions - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Special Dialing Functions

Description
This feature lets you add special characters for System Speed Dial numbers,
Personal Speed Dial numbers, and Auto Dial numbers, as follows:
Function
Pause
Recall
Stop
Touch-Tone
Enable
Considerations
Special characters cannot be used when dialing a number manually.
Examples
Pause: To call an answering machine at 555-0529, wait 4.5 seconds, then
n
321
dial
Recall/Centrex Feature Button: The following entry shows how to
n
program an Auto Dial button with a Centrex feature that you use while on a
call, for which the feature access code is *32. This example includes a
Recall signal to send a switchhook flash to the Centrex system when you
5-240
Feature Reference
Button Display
P
h
S R
S
!
& T
to retrieve messages, enter
Description
Inserts a 1.5-second pause in the dialing
sequence to wait for a response, such
as a dial tone or computer voice
message.
Sends a timed switchhook flash needed
to alert the system on the other end
(such as a PBX or Centrex system), and
to use some local telephone company
custom calling features (such as Call
Waiting). Use Recall only as the first
entry in an Auto Dial or Speed Dial
number.
Stops the dialing sequence until the
Auto Dial button or Speed Dial number
is used again (for example, so the user
can enter additional digits, such as a
credit card number or password). To
continue, press the Auto Dial button or
and the two- or three-digit Speed Dial
code. (Stop cannot be programmed from
an MLC-6 or a TransTalk 9000-series
!
phone, since it has no
Sends touch tones over a rotary line, to
electronic equipment such as answering
machines and bank computers.
5 5 5 0 5 2 9 h h h 3 2 1
f
button.)
.