Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 189

Press the Dial button to return the call (see dialing instructions below).
Press the More button to view the caller's name.
At the Name Display, shown in
An Out-of-Area message displays if the call was dialed from a region that
does not support Caller ID. A Privacy message displays if the caller blocked
transmission of Caller ID information. A No Name message displays if no
information was received.
Figure 5-3. Caller ID Name Display
You have several options at the Name display:
Press the Next button to view the next logged call.
If you have a second logged call, it is displayed.
Press the Entry Erase button to erase the log record.
An Entry Erased message displays.
Press the Dial button to return the call (See dialing instructions below).
Press the More button to view the Call Status display.
At the Call Status display, you see the following information:
At the left of the display, you see the date and time of the call and either am
or pm to indicate whether the call arrived in the morning or afternoon.
The entry in the next column indicates the line that the call came in on.
The next entry (a vertical handset symbol) indicates whether the call was
answered at the extension. If the call was not answered, this column is
blank.
In the next column, D indicates that a user attempted to use automatic
dialing to return the call. If no callback was attempted, the column is blank.
Figure 5-4. Call Status Display
If you want to return the call, press the Dial button. The display shown in
5-5 appears.
5-74
Feature Reference
Figure 5-3, the caller's name is shown.
Figure