Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 125

1. Press
10 or 11.
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button, preferably one with lights.
4. Press
5. Program another button for this extension or exit programming mode.
Using
To enter or change an optional account code:
1. From a system phone, if a password is programmed for the system, you
must enter it before lifting the handset. (See "System Password (#403)"
for more information.)
2. After lifting the handset (or while already active on an outside call), press
the programmed Account Code Entry button or press
If the Account Code Entry button has lights, the green light turns on.
3. Enter an account code using one of the following methods:
4. Press the programmed Account Code Entry button or press
to indicate the end of the code.
If the Account Code Entry button has lights, the green light turns off.
5. Make the call, if you are not already on a call.
6. To change the account code, repeat Steps 2 through 4.
To enter or change a forced account code:
1. From a system phone, if a password is programmed for the system, you
must enter it before lifting the handset. (See "System Password (#403)"
for more information.)
2. Lift the handset or press
3. Press the programmed Account Code Entry button or press
If the Account Code Entry button has lights, the green light turns on.
4. Enter an account code (supplied by your System Manager) using one of
the following methods:
5-10
Feature Reference
f 0 0 s s c
f 1 2
.
Dial it manually using the phone's dialpad.
Dial a System or Personal Speed Dial number programmed with the
account code.
Press an Auto Dial button programmed with the account code.
S
.
Dial it manually using the phone's dialpad.
Dial a System or Personal Speed Dial number programmed with the
account code.
at extension
f 1 2
.
f 1 2
f 1 2
.