Loudspeaker Paging (I70) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Loudspeaker Paging (I70)

Description
This feature accesses the loudspeaker paging system, if you have one connected
to the system through the PAGE jack on the processor module.
Related Features
Users can make Simultaneous Paging announcements over the
n
loudspeaker paging system and the idle system phones assigned to
Calling Group 1. See Calling Group Extensions (#502) to program
Calling Group 1.
You can specify the loudspeaker paging system as a hotline alert extension
n
so that the hotline phone can be used to make announcements over the
loudspeaker. For more information, see Hotline (#603).
Considerations
You can program a Loudspeaker Paging button on a system phone to
n
access the loudspeaker with one touch.
If the loudspeaker paging system is in use, a user attempting to make an
n
announcement hears a busy tone.
Programming
(See Figure 2-3 on page 2-23
s
such as and
To program a Loudspeaker Paging button:
1. Press
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. Press left
5. Program another button for this extension or exit programming mode.
Using
System Phone
To make an announcement over the loudspeaker paging system:
1. Press the programmed button or
for the location of special programming buttons
e
on system phones.)
f 0 0 s s c
at extension 10 or 11.
i 7 0
.
i 7 0
, then lift the handset.
Feature Reference
5-175