Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 185

2. At the Extension prompt, enter the extension number to be programmed.
For example, to program extension 23, press
3. At the Line prompt, enter the line number to be associated with the
extension. For example, to associate line 2 with the extension, press
2
.
4. To change the line association for this extension, press
appropriate value displays—see "Valid Entries."
5. At this point:
6. Select another procedure or exit programming mode.
5-70
Feature Reference
To associate another line with this extension, press
p until the line number shows on the display. Repeat Step 4.
To associate another extension, press
begin at Step 2.
2 3
.
D
until the
n
or
N
P and
0