Vms Cover Rings (#117) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

VMS Cover Rings (#117)

Description
This feature applies only if you have a voice messaging system.
This System Programming procedure, which applies to all system extensions
programmed for VMS Cover, defines the number of times a call rings before it is
sent to a user's voice mailbox.
Related Features
VMS Cover also applies to lines that have been designated an owner with
n
Line Coverage Extension (#208).
If an extension has VMS Cover or Automatic VMS Cover (#310) active,
n
unanswered calls to that extension are routed to the voice messaging
system after the specified number of VMS Cover Rings.
Valid Entries
1–9
3 4
Programming
(See Figure 2-3 on page 2-23
s
such as and
To change the number of times calls ring before being sent to the voice
messaging system:
1. Press
2. Enter a setting (1–9). For example, to set VMS Cover Rings to 4, press
d
or until a display similar to the following appears:
VMS Cover Rings
4 Rings
3. Select another procedure or exit programming mode.
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 1 1 7
at extension 10 or 11.
5-271
Feature Reference
D