Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 316

Valid Entries
1 = Assigned to next available button at extension 10
2 = Not Assigned 4
3 = Select button (then press a programmable button with lights to assign
Outgoing Call Restriction to that button)
Programming
(See Figure 2-3 on page 2-23
s
such as and
To program an Outgoing Call Restriction button at extension 10:
1. Press
2. At this point:
n
Outgoing CallRstr Button
1 Assigned - Ext10
n
Outgoing CallRstr Button
2 Not Assigned
n
Outgoing CallRstr Button
3 Select a Button
3. Select another procedure or exit programming mode.
4. Label the Outgoing Call Restriction button at extension 10.
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 1 1 4
at extension 10 or 11.
If you want to assign Outgoing Call Restriction to the first available
D
button, press until a display similar to the following appears:
If you want to remove the Outgoing Call Restriction button
D
assignment, press until a display similar to the following appears:
If you want to assign Outgoing Call Restriction to a specific button,
3
press . A display similar to the following appears:
Then press a programmable button with lights to assign Outgoing
Call Restriction to that button.
5-201
Feature Reference