Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 210

If you want to unassign Direct Extension Dial, press
similar to the following appears:
DXD Button
2 Not Assigned
If you want to assign Direct Extension Dial to a specific button, press 3. The
display reads:
DXD Button
3 Select a Button
Then press a programmable button with lights to assign Direct Extension
Dial to that button.
3. Select another procedure or exit programming mode.
4. Label the Direct Extension Dial button at extension 10.
Using
To turn Direct Extension Dial on:
Press the Direct Extension Dial button at extension 10.
The green light is on steady and Direct Extension Dial is on. If calls are ringing
when Direct Extension Dial is turned on, the calls will be answered immediately by
the system.
To turn Direct Extension Dial off:
Press the Direct Extension Dial button at extension 10.
The green light goes off and Direct Extension Dial is off. Any calls in the process
of being answered by the system will continue to hear the recorded message and
will be prompted to enter a destination extension.
D
until a display
5-95
Feature Reference