Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 69

Buttons and Indicators
Feature
+
–
Conf
Mic/
Transfr
HFAI
Spkr Hold
The following buttons and indicators appear on system phones:
Display. (PARTNER-34D and PARTNER-18D only) Shows date, day, and time when the phone
is idle, number dialed when placing a call, extension number (and name if programmed) calling
you or transferring a call to you, and duration while a call is in progress. When programming,
shows settings, options, and prompts. (To adjust the display contrast, see Volume Control
Buttons on the next page.)
Line/Programmable Buttons. Used for individual outside lines or (if no line is assigned on a
button) for programming telephone or extension numbers, or other system features (such as Last
Number Redial). When a line is assigned, press the line button to make a call on that specific line
(lights show status of line). When a number feature is programmed, press the button to dial the
number or use the feature. The PARTNER-34D has 36 programmable buttons (32 with lights and
4 without lights); the PARTNER-18D has 20 programmable buttons (16 with lights and 4 without
lights); the PARTNER-18 has 16 programmable buttons (all with lights); the PARTNER-6 has 4
programmable buttons (all with lights).
Intercom Buttons. Press to make (or answer) a call to (or form) another extension in the
system.
Feature. Press to change programmed settings or use system features.
Conf. Press to add other parties to your call.
Transfr. Press to pass a call to another extension.
Hold. Press to put a call on hold.
3-2
Learning About Telephones
PARTNER-34D
Ext.
Message
Intercom Intercom
ABC
Feature
+
1 2
GHI JKL
–
Conf
4 5
Mic/ PQRS TUV
Transfr
7 8
HFAI
Spkr Hold
*
0
Display
Programmable Buttons
(4 without lights)
Line/Programmable
Buttons
(32 with lights)
Intercom Buttons
Message Light
DEF
3
MNO
6 Pull-Out Tray for Quick
Reference Cards
WXYZ
9
(all PARTNER models)
#
(2)