Credit Card Scanners - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

For example, suppose Contact Closure 1 can release the door lock on the
Deliveries door. You program extension Y as an eligible extension for Contact
Closure 1 using Contact Closure Group (#612), and set the Contact Closure
Operation Type (#613) to 5-Seconds On. When a delivery person uses the
doorphone (extension X) to announce a package delivery, the user at extension Y
f41
can use
door will be released for five seconds, enabling the delivery person to enter.
Programming Contact Closure Devices
1. Use Doorphone Extension (#604) to assign Doorphone 1 to extension X.
2. Use Doorphone Alert Extensions (#606) to identify extension Y as an
alert extension for Doorphone 1.
3. Use Contact Closure Group (#612) to assign extension Y to Contact
Closure Group 1. This extension can activate Contact Closure 1.
4. Use Contact Closure Operation Type (#613) to set Contact Closure 1 to
Option 3, "5-Seconds On."

Credit Card Scanners

Many retail businesses and restaurants use credit card scanners to get instant
approval of credit card purchases. The system allows your credit card scanners to
share the lines in your system (as shown in
card scanner on an extension by itself, or combine it with a system phone or a
standard phone on the same extension (see "Combination Extensions" in the
PARTNER Advanced Communications System Installation guide).
Figure 4-7. Credit Card Scanner
to activate Contact Closure 1. The lock on the Deliveries
Lines
Mic
HFAI
Spkr
CONTROL
UNIT
Ext
X
Figure 4-7). You can install the credit
Telephone
(optional)
Ext.
Message
Intercom Intercom
+ Feature ABC DEF
1 2 3
GHI JKL MNO
– Conf 4 5 6
PQRS TUV WXYZ
Transfr 7 8 9
Hold * 0 #
Credit
Card
Scanner
Using Auxiliary Equipment
4-15