Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 281

Valid Entries
1 = No Restriction (calls permitted on that line) 4
2 = Out Only (can only make outside calls, not receive them, on that line)
3 = In Only (can only receive calls, not make them, on that line)
4 = No Access (cannot receive or make calls, but can join calls, receive
transferred calls, or pick up calls on hold on that line)
Programming
(See Figure 2-3 on page 2-23
s
such as and
To restrict an extension from making calls on a specific line:
1. Press
2. At the Extension: prompt, enter the extension number to be
programmed. For example, to program extension 23, press
3. At the Line: prompt, enter the line number to be restricted at this
extension. For example, to restrict line 2, press
The current restriction displays.
4. To change the line restriction for this extension, press
appropriate value displays—see "Valid Entries" on the previous page.
5. At this point:
n
n
6. Select another procedure or exit programming mode.
5-166
Feature Reference
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 3 0 2
at extension 10or 11.
To restrict another line at this extension, press
number shows on the display. Repeat Step 4.
To restrict another extension, press
2 3
.
0 2
.
D
until the
n p
or until the line
N P
and begin at Step 2.