Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 238

— Toll Call Prefix required
— Toll Call Prefix not required
Programming
(See Figure 2-3 on page 2-23
s
such as and
To create an Emergency Phone Number List:
1. Press
2. Select a list entry (01–10). For example, to select the third entry, press
A display similar to the following appears:
Emergency List 03
Data - - - - - - - - - - - -
3. Enter the telephone number.
4. To save the telephone number in memory, you must press
5. At this point:
n
n
n
6. Select another procedure or exit programming mode.
12015556666 and 02015556666
2015556666
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 4 0 6
at extension 10 or 11.
To enter other phone numbers, press
and repeat Steps 3 and 4.
To change the phone number you just entered, press
Steps 3 and 4.
To delete the phone number you just entered, press
e
.
n
to select a different list entry
r
and repeat
r
.
Feature Reference
0 3
.
5-123