Last Number Redial (F05) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Last Number Redial (F05)

Description
This feature redials the last outside number dialed (maximum 28 digits). It is
useful for immediately redialing a busy number.
Related Features
You can use Save Number Redial to temporarily save the last number
n
dialed. The difference between Last Number Redial and Save Number
Redial is that Save Number Redial allows you to make other outside calls
before redialing the saved number.
System Speed Dial Numbers cannot be redialed with this feature.
n
A Last Number Redial number can begin with a star code; the system
n
automatically inserts a delay based on the Star Code Dial Delay (#410)
setting.
A number dialed automatically using the Caller ID Call Logging and
n
Dialing feature can be redialed with this feature.
Considerations
This feature redials all digits dialed on the last outside call except account
n
codes.
You can program a Last Number Redial button on a system phone to redial
n
a number with one touch.
Programming
(See Figure 2-3 on page 2-23
s
such as and
To program a Last Number Redial button:
1. Press
2. Enter the number of the extension to be programmed with this feature.
3. Press a programmable button.
4. Press
5. Program another button for this extension or exit programming mode.
for the location of special programming buttons
e
on system phones.)
f 0 0 s s c
at extension 10 or 11.
f 0 5
.
5-161
Feature Reference