Night Service Group Extensions (#504) - Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions

Night Service Group Extensions (#504)

Description
This System Programming procedure assigns extensions to the Night Service
Group. When Night Service is on and a call comes in, all extensions in the Night
Service Group ring immediately, regardless of normal Line Ringing settings. Any
extensions that would normally ring during the day, will also ring.
Related Features
You must use Night Service Button (#503) to program the button that is
n
used to turn Night Service on and off.
If you program a System Password (#403), when Night Service is on,
n
users in the Night Service Group can dial only numbers on the Emergency
Phone Number List (#406) and Marked System Speed Dial Numbers
without entering the System Password.
If you have a voice messaging system, lines that are assigned to the user's
n
phones in the Night Service Group are covered by the voice messaging
system depending on the status of VMS Hunt Delay (#506) and VMS Hunt
Schedule (#507).
Considerations
Do not include extensions connected to certain auxiliary equipment (auto
n
attendants, voice messaging systems, internal or external hotline phones,
or doorphones) in the Night Service Group.
A user in the Night Service Group can receive an after-hours outside call
n
only if it comes in on a line or pool that is assigned to that user's phone.
Line or pool assignments for extensions in the Night Service group can
vary from one extension to another.
Valid Entries
1 = Assigned to group
2 = Not Assigned to group 4
Programming
(See Figure 2-3 on page 2-23
s
such as and
1. Press
2. Enter the number of the extension to be programmed. For example, to
program extension 13, press
5-194
Feature Reference
for the location of special programming buttons
e
on system phones.)
f 0 0 s s # 5 0 4
at extension 10 or 11.
1 3
.