Lucent Technologies PARTNER Advanced Communications System Programming And Use Instructions page 53

e
ends an entry of variable length, such as a telephone number in an
Allowed Phone Number List.
s
starts the System Programming process.
c
starts the Centralized Telephone Programming process (to
customize individual telephones centrally from extension 10 or 11).
f 0 0
when followed by , enters or exits programming mode.
w
enters a "wildcard" (a character that matches any digit dialed) in
telephone numbers in Allowed Phone Number Lists (#407), Disallowed
Phone Number Lists (#404), and the Forced Account Code List (#409).
2-22
Programming