Monitoring Dhcp Local Address Pools - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

JUNOSe 11.1.x Broadband Access Configuration Guide
Related Topics

Monitoring DHCP Local Address Pools

Display the DHCP local pool configurations.
Purpose
To display information about the local address pool:
Action
host1#show ip dhcp-local pool
*****************************************
Pool Name - ispBoston
Pool Id - 6
Domain Name - ispBoston
Network - 10.10.0.0
Mask - 255.255.255.0
NETBIOS Node Type - 1
Lease - Days:0 Hours:0 Minutes:24 Seconds:0
Grace Period - Days:0 Hours:0 Minutes:10 Seconds:0
Grace period for released leases enabled
DNS Servers
NETBIOS Name Servers
Default Routers
Server Address - 10.10.20.8
Linked Pool - cable5
High utilization threshold - 85%
Abated utilization threshold - 75%
Current utilization - 0%
Utilization trap disabled.
Shared pool allocations - 25
To display information about local address pool groups:
host1#show ip dhcp-local pool groups
There is 1 group configured
*****************************************
Group Name: pool8_7-1-Group
Table 113 on page 557 lists the show ip dhcp-local pool command output fields.
Meaning
556
Monitoring DHCP Local Address Pools
show dhcp-external
10.10.1.1
10.10.1.1
10.10.1.2
10.10.1.3
DHCP Local Server Pool Groups
Total Addresses Available: 145
Total Addresses In Use:
High Utilization Thresh:
Abated Utilization Thresh: 75%
Current Utilization:
Trap Enabled:
====== Pools ======
pool8_7-1
pool8_7-2
pool8_7-3
pool8_7-4
pool8_7-5
0
85%
0%
no