Configuring Forwarding Table (Nsm Procedure); Table 207: Forwarding Table Fields - Juniper NETWORK AND SECURITY MANAGER 2010.3 - M-SERIES AND MX-SERIES DEVICES GUIDE REV1 Manual

M-series and MX-series Devices
Table 206: Flow Route Fields (continued)
Option
Traceoptions

Configuring Forwarding Table (NSM Procedure)

Table 207: Forwarding Table Fields

Option
Comment
None
368
Function
Enables you to define tracing operations
that track all routing protocol
functionality in the device and specify
that tracing results be saved in a log file.
You can configure the tracing flag, filter,
and the tracing policy.
A forwarding table contains the routes actually used to forward packets through the
device to their next-hop destination. This feature enables you to configure forwarding
table in NSM.
To configure forwarding table in NSM:
In the navigation tree, select
1.
In the list, double click the device to select it.
Devices
2.
Click the
3. Configuration
In the configuration tree, expand
4.
Select Forwarding Table
5.
Add or modify the parameters as specified in Table 207 on page 368.
6.
Click one:
7.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the routing option settings.
NOTE: After you make changes to a device configuration, you must push that updated
device configuration to the physical security device for those changes to take effect.
You can update multiple devices at one time. See the Updating Devices section in the
Network and Security Manager Administration Guide for more information.
Function
Specifies the comment for the
forwarding table.
Specifies that no next- hop parameter
is to be added to the forwarding table.
Your Action
1.
2.
Device Manager > Devices
tab.
.
Routing Options
.
Your Action
Enter a comment.
Select the option button.
Expand the tree and
Validation
select .
Traceoptions
Expand the tree and
Traceoptions
configure the file and flag
parameters, and the tracing policy.
.
Copyright © 2010, Juniper Networks, Inc.