Configuring Forwarding Table (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER - NSM CONFIGURATION GUIDE FOR EX SERIES DEVICES REV 3 Configuration Manual

Table 47: Graceful Restart Fields
Option
Comment
Disable
Restart Duration

Configuring Forwarding Table (NSM Procedure)

Copyright © 2010, Juniper Networks, Inc.
In the navigation tree, select
1.
In the list, double click the device to select it.
Devices
2.
Click the
3. Configuration
In the configuration tree, expand
4.
Select Graceful Restart
5.
Enter the parameters as specified in Table 47 on page 75.
6.
Click one:
7.
OK—To save the changes.
Cancel—To cancel the modifications.
Apply—To apply the routing option settings.
NOTE: After you make changes to a device configuration, you must push that
updated device configuration to the physical security device for those changes
to take effect. You can update multiple devices at one time. See the Updating
Devices section in the Network and Security Manager Administration Guide for
more information.
Function
Specifies the comment for the graceful
restart.
Specifies whether graceful restart is
enabled for the device.
Specifies the duration of the grace period
for the device to restart.
A forwarding table contains the routes actually used to forward packets through the
device to their next-hop destination. This feature enables you to configure forwarding
table in NSM.
To configure forwarding table in NSM:
In the navigation tree, select
1.
In the list, double click the device to select it.
Devices
2.
Click the
3. Configuration
Device Manager > Devices
tab.
Routing Options
.
Your Action
Enter a comment.
Enter a value for the duration or select a
value from the list.
Device Manager > Devices
tab.
Chapter 7: Configuring Routing Options
.
.
Select the check box to disable
graceful restart.
Clear the check box to enable graceful
restart.
.
75