Use-String - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

use-string

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
use-string string;
[edit ethernet-switching-options secure-access-port vlan (all | vlan-name) dhcp-option82
remote-id]
[edit forwarding-options helpers bootp dhcp-option82 remote-id]
[edit forwarding-options helpers bootp interface interface-name dhcp-option82 remote-id]
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Use a string rather than the MAC address of the host system (the default) in the remote
ID value in the DHCP option 82 information.
—Character string used as the remote ID value.
string
Range:1–255 characters
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Setting Up DHCP Option 82 on an EX Series Switch with No Relay Agent
Between Clients and DHCP Server on page 3122
Example: Setting Up DHCP Option 82 with an EX Series Switch as Relay Agent Between
Clients and a DHCP Server on page 3119
Setting Up DHCP Option 82 on the Switch with No Relay Agent Between Clients and
DHCP Server (CLI Procedure) on page 3153
Setting Up DHCP Option 82 with the Switch as a Relay Agent Between Clients and
DHCP Server (CLI Procedure) on page 3150
[edit forwarding-options] Configuration Statement Hierarchy on page 58
RFC 3046, DHCP Relay Agent Information Option, at
Chapter 104: Configuration Statements for Port Security
http://tools.ietf.org/html/rfc3046.
3203