Use-Vlan-Id - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos

use-vlan-id

Syntax
Release Information
Description
Required Privilege
Level
Related
Documentation
3204
®
OS for EX Series Ethernet Switches, Release 10.4
use-vlan-id;
Statement introduced in Junos OS Release 9.3 for EX Series switches.
Use the VLAN ID rather than the VLAN name (the default) in the circuit ID value in the
DHCP option 82 information.
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Example: Setting Up DHCP Option 82 on an EX Series Switch with No Relay Agent
Between Clients and DHCP Server on page 3122
Example: Setting Up DHCP Option 82 with an EX Series Switch as Relay Agent Between
Clients and a DHCP Server on page 3119
Setting Up DHCP Option 82 on the Switch with No Relay Agent Between Clients and
DHCP Server (CLI Procedure) on page 3153
Setting Up DHCP Option 82 with the Switch as a Relay Agent Between Clients and
DHCP Server (CLI Procedure) on page 3150
[edit forwarding-options] Configuration Statement Hierarchy on page 58
RFC 3046, DHCP Relay Agent Information Option, at http://tools.ietf.org/html/rfc3046.
Copyright © 2010, Juniper Networks, Inc.