Configuring Mac Move Limiting (J-Web Procedure) - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

Complete Software Guide for Junos
Related
Documentation
3144
®
OS for EX Series Ethernet Switches, Release 10.4
To configure a MAC move limit for MAC addresses within a specific VLAN or for MAC
addresses within all VLANs, using the CLI:
On a single VLAN: To limit the number of MAC address movements that can be made
by an individual MAC address within the VLAN
of 5 :
[edit ethernet-switching-options secure-access-port]
user@switch# set vlan employee–vlan mac-move-limit 5
The action is not specified, so the switch performs the default action
that an individual MAC address within the
within one second.
On all VLANs: To limit the number of MAC movements that can be made by individual
MAC addresses within all VLANs, set a MAC move limit of
[edit ethernet-switching-options secure-access-port]
user@switch# set vlan all mac–move-limit 5
The action is not specified, so the switch performs the default action
that an individual MAC address within any of the VLANs has moved more than 5 times
within one second.
Configuring MAC Move Limiting (J-Web Procedure) on page 3145
Example: Configuring Port Security, with DHCP Snooping, DAI, MAC Limiting, and MAC
Move Limiting, on an EX Series Switch on page 3073
Verifying That MAC Move Limiting Is Working Correctly on page 3165
Monitoring Port Security on page 3157
Configuring Autorecovery From the Disabled State on Secure or Storm Control Interfaces
(CLI Procedure) on page 3018
Understanding MAC Limiting and MAC Move Limiting for Port Security on EX Series
Switches on page 3062
, set a MAC move limit
employee-vlan
employee-vlan has moved more than 5 times
:
5
Copyright © 2010, Juniper Networks, Inc.
if it tracks
drop
if it tracks
drop