Disable-Timeout - Juniper JUNOS OS 10.4 - FOR EX REV 1 Manual

disable-timeout

Syntax
Hierarchy Level
Release Information
Description
Default
Options
Required Privilege
Level
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
disable-timeout timeout;
[edit ethernet-switching-options port-error-disable]
Statement introduced in Junos OS Release 9.6 for EX Series switches.
Specify how long the Ethernet switching interfaces remain in a disabled state due to
MAC limiting, MAC move limiting, or storm control errors.
NOTE: If you modify the timeout value of an existing disable timeout, the
new timeout value does not impact the timing of restoration to service of
currently disabled interfaces that have been configured for automatic
recovery. The new timeout value is applied only during the next occurrence
of a port error.
You can bring up the currently disabled interfaces by running the
ethernet-switching port-error
The disable timeout is not enabled.
timeout —Time, in seconds, that the disabled state remains in effect. The disabled interface
is automatically restored to service when the specified timeout value is reached.
Range: 10 through 3600 seconds
system—To view this statement in the configuration.
system-control—To add this statement to the configuration.
Example: Configuring Storm Control to Prevent Network Outages on EX Series Switches
on page 3015
Configuring Autorecovery From the Disabled State on Secure or Storm Control Interfaces
(CLI Procedure) on page 3018
Chapter 104: Configuration Statements for Port Security
command.
clear
3181