General Information
Media Path
This section describes the paper feed path of the entire device and the paper feed process in the each
feed section.
Paper Path Layout
The following shows the paper feed layout when the duplex print unit and the tray module are
installed, and the components relevant to paper feed.
Exit Sensor
Heat Roller
Duplex Roller
Transfer Roller 2
Rubber Registration Roller
Metal Registration Roller
Registration Sensor
TA3 Roller Assembly
Feed Roller Assembly
Nudger Roller Assembly
Retard Roller Assembly
Turn Roller Assembly
Paper Jam Sensor
Feed Roller Assembly
Retard Roller Assembly
Nudger Roller Assembly
Feeding from Paper Cassette
The paper loaded in the paper cassette is fed between the Feed Roller and the Retard Roller by the
Nudger Roller, and fed farther to the registration section by the rotation of the Feed Roller and the
Retard Roller.
The Nudger Roller and the Feed Roller are rotated by the torque of the Paper Transport Motor via the
Feed Roller Clutch.
The Retard Roller, pressed from underneath by the spring pressure and forced to the Feed Roller, plays a
role of fanning a sheet by the rotation friction.
1-26
Phaser 6600 and WorkCentre 6605
Service Manual
Exit Roller
Stack Full Sensor
M
C
K
Option 550 No Paper Sensor
Transfer Belt Drive Roller
Y
550 No Paper Sensor
: Laser Beam
: Paper Feed
: Paper Sensor
Bypass Tray
No Paper Sensor
Feed Roller Assembly
Retard Holder Assembly
TA1 Roller Assembly
TA2 Roller Assembly
s6600-242
Xerox Internal Use Only