c.
Front Cover Support Arm placed correctly on the Stop Bracket,
Support Arm
Figure 21 Front Cover Support Arm Placement
Initial Release
Xerox® B205/B215 Multifunction Printer Service Manual
Figure
21.
REP 4.10 Paper Feed Sensors PWB and Actuators
Parts List on
Removal
1.
Switch off the printer, then disconnect the power cord.
2.
Remove the Duplex,
3.
Set the printer on the Rear Cover (Front of printer facing up).
4.
Remove two screws, then remove the Bottom Bar,
July 2019
4-35
PL 4.4
REP
4.3.
Figure
Screws
Figure 1 Bottom Bar (Bottom View)
1.
Repairs / Adjustments
REP 4.9, REP 4.10