ABB Relion 650 Series Technical Manual page 213

1MRK 506 326-UUS B
6.11.5 Settings
Table 121: CSPRBRF (50BF) Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
FunctionMode Current
Contact
Current&Contact
BuTripMode 2 out of 4
1 out of 3
1 out of 4
RetripMode Retrip Off
CB Pos Check
No CBPos Check
Pickup_PH 5 - 200
Pickup_N 2 - 200
t1 0.000 - 60.000
t2 0.000 - 60.000
t2MPh 0.000 - 60.000
Table 122: CSPRBRF (50BF) Group settings (advanced)
Name Values (Range)
Pickup_BlkCont 5 - 200
Table 123: CSPRBRF (50BF) Non group settings (basic)
Name Values (Range)
GlobalBaseSel 1 - 6
6.11.6 Monitored data
Table 124: CSPRBRF (50BF) Monitored data
Name
IA
IB
IC
IN
Line distance protection REL650
Technical manual
Unit Step
- -
- -
- -
- -
%IB 1
%IB 1
s 0.001
s 0.001
s 0.001
Unit Step
%IB 1
Unit Step
- 1
Type Values (Range)
REAL -
REAL -
REAL -
REAL -
© Copyright 2011 ABB Power Grids. All rights reserved
Default Description
Disabled Operation Disable / Enable
Current Detection principle for back-up trip
1 out of 3 Back-up trip mode
Retrip Off Operation mode of re-trip logic
10 Phase current pickup in % of IBase
10 Operate residual current level in % of IBase
0.000 Time delay of re-trip
0.150 Time delay of back-up trip
60.000 Time delay of back-up trip at multi-phase
pickup
Default Description
20 Current for blocking of 52a operation in %
of Ibase
Default Description
1 Selection of one of the Global Base Value
groups
Unit Description
A Measured current in phase A
A Measured current in phase B
A Measured current in phase C
A Measured residual current
Section 6
Current protection
PID-2349-SETTINGS v7
PID-2349-MONITOREDDATA v7
207