ABB Relion 650 Series Technical Manual page 189

1MRK 506 326-UUS B
Name
PUNDIN
PUVN
PUFW
PUREV
CND
VNREL
6.7.5 Settings
Table 97: SDEPSDE (67N) Group settings (basic)
Name Values (Range)
Operation Disabled
Enabled
OpModeSel 3I0Cosfi
3I03V0Cosfi
3I0 and fi
DirMode Forward
Reverse
RCADir -179 - 180
RCAComp -10.0 - 10.0
ROADir 0 - 90
INCosPhiPU 0.25 - 200.00
SN_PU 0.25 - 200.00
INDirPU 0.25 - 200.00
tDef 0.000 - 60.000
SRef 0.03 - 200.00
TDSN 0.00 - 2.00
OpINNonDir Disabled
Enabled
INNonDirPU 1.00 - 400.00
tINNonDir 0.000 - 60.000
Table continues on next page
Line distance protection REL650
Technical manual
Type Description
BOOLEAN Pick up of non directional residual overcurrent
BOOLEAN Pick up of non directional residual overvoltage
BOOLEAN Pick up of directional function for fault in forward direction
BOOLEAN Pick up of directional function for fault in reverse direction
INTEGER Direction of fault
BOOLEAN Residual voltage release of operation of directional modes
Unit Step
- -
- -
- -
Deg 1
Deg 0.1
Deg 1
%IB 0.01
%SB 0.01
%IB 0.01
s 0.001
%SB 0.01
- 0.01
- -
%IB 0.01
s 0.001
© Copyright 2011 ABB Power Grids. All rights reserved
Default Description
Disabled Operation Disable / Enable
3I0Cosfi Selection of operation mode for
protection
Forward Direction of operation forward or reverse
-90 Relay characteristic angle RCA
0.0 Relay characteristic angle compensation
90 Relay open angle ROA used as release in
phase mode
1.00 Set level for 3I0cosPhi, directional residual
overcurrent, in % of IBase
10.00 Set level for 3I0U0cosPhi, starting inverse
time count, in % of SBase
5.00 Set level for directional residual
overcurrent protection, in % of IBase
0.100 Definite time delay directional residual
overcurrent
10.00 Reference value of residual power for
inverse time count, in % of SBase
0.10 Time multiplier setting for directional
residual power mode
Disabled Operation of non-directional residual
overcurrent protection
10.00 Set level for non-directional residual
overcurrent, in % of IBase
1.000 Time delay for non-directional residual
overcurrent
Section 6
Current protection
PID-1975-SETTINGS v5
183