ABB Relion 650 Series Technical Manual page 400

Hide thumbs Also See for Relion 650 Series:

Table of Contents

Table 348: IB16FCVB Output signals

The function does not have any parameters available in local HMI or Protection and Control IED

Manager (PCM600)

Operation principle

An example is used to explain the principle of operation: With integer 15 sent to and received by

the IB16FCVB function on the IEC 61850 the OUTx changes from 0 to 1 on each of the OUT1; OUT2

OUT3 and OUT4. All other OUTx (5≤x≤16) remains 0. The boolean interpretation of this is

represented by the assigned values of each of the outputs OUT1 = 1; and OUT2 = 2; and OUT3= 4;

and OUT4 = 8. The sum of these OUTx (1≤x≤4) is equal to the integer 15 received via the IEC 61850

network. The remaining OUTx = 0 for (5≤x≤16).

OUTx represents a value when activated. The value of each of the OUTx is in accordance with the

Table 349. When not activated the OUTx has the value 0.

The value of each OUTx for 1≤x≤16 (1≤x≤16) follows the general formulae: OUTx = 2

the values of all activated OUTx = 2

IEC 61850 to the IB16FCVB_1 function block.

The Integer to Boolean 16 conversion with logic node representation function (IB16FCVB) will

transfer an integer with a value between 0 to 65535 communicated via IEC 61850 and connected to

the IB16FCVB function block to a combination of activated outputs OUTx where 1≤x≤16. The values

represented by the different OUTx are according to Table 349. When an OUTx is not activated, its

where 1≤x≤16 will be equal to the integer value received over

1MRK 506 326-UUS B

PID-1980-OUTPUTSIGNALS v6

ABBD8E242982 v2

SEMOD176587-4 v3.1.1

Line distance protection REL650

Technical manual