ABB Relion 650 Series Technical Manual page 334

Section 10
Control
10.8 Single point generic control 8 signals SPC8GGIO
10.8.1 Identification
Function description
Single point generic control 8 signals
10.8.2 Functionality
The Single point generic control 8 signals (SPC8GGIO) function block is a collection of 8 single
point commands, designed to bring in commands from REMOTE (SCADA) to those parts of the
logic configuration that do not need extensive command receiving functionality (for example,
SCSWI). In this way, simple commands can be sent directly to the IED outputs, without
confirmation. Confirmation (status) of the result of the commands is supposed to be achieved by
other means, such as binary inputs and SPGGIO function blocks. The commands can be pulsed or
steady.
10.8.3 Function block
BLOCK
PSTO
IEC09000086 V1 EN-US
Figure 171: SPC8GGIO function block
10.8.4 Signals
Table 252: SPC8GGIO Input signals
Name
BLOCK
PSTO
328
SPC8GGIO
^OUT1
^OUT2
^OUT3
^OUT4
^OUT5
^OUT6
^OUT7
^OUT8
IEC09000086_1_en.vsd
Type Default
BOOLEAN 0
INTEGER 2
© Copyright 2011 ABB Power Grids. All rights reserved
IEC 61850 IEC 60617
identification identification
SPC8GGIO -
Description
Block of function
Operator place selection
1MRK 506 326-UUS B
ANSI/IEEE C37.2
device number
-
PID-1865-INPUTSIGNALS v5
Line distance protection REL650
Technical manual
SEMOD176456-2 v2
SEMOD176462-4 v5
SEMOD176479-4 v4