1MRK 506 326-UUS B
•
Abbreviations and acronyms in this manual are spelled out in the glossary. The glossary also
contains definitions of important terms.
•
Push button navigation in the LHMI menu structure is presented by using the push button
icons, for example:
To navigate between the options, use
•
HMI menu paths are presented in bold, for example:
Select Main menu/Settings.
•
LHMI messages are shown in Courier font, for example:
To save the changes in non-volatile memory, select Yes and press
•
Parameter names are shown in italics, for example:
The function can be enabled and disabled with the
•
The ^ character in front of an input or output signal name in the function block symbol given
for a function, indicates that the user can set an own signal name in PCM600.
•
The * character after an input or output signal name in the function block symbol given for a
function, indicates that the signal must be connected to another function block in the
application configuration to achieve a valid application configuration.
•
Dimensions are provided both in inches and mm. If it is not specifically mentioned then the
dimension is in mm.
Line distance protection REL650
Technical manual
© Copyright 2011 ABB Power Grids. All rights reserved
and
.
Operation setting.
Section 1
Introduction
.
35