ABB Relion 650 Series Technical Manual page 395

Hide thumbs Also See for Relion 650 Series:

Table of Contents

1MRK 506 326-UUS B

Table 343: B16IFCVI Output signals

The function does not have any parameters available in local HMI or Protection and Control IED

Manager (PCM600)

Monitored data

Table 344: B16IFCVI Monitored data

Operation principle

The Boolean 16 to integer conversion with logic node representation function (B16IFCVI) will

transfer a combination of up to 16 binary inputs INx, where 1≤x≤16, to an integer. Each INx

represents a value according to the table below from 0 to 32768. This follows the general formula:

output OUT as a sum of the integer values of all the inputs INx that are activated. OUT is an

integer. When all INx (where 1≤x≤16) are activated, that is = Boolean 1, it corresponds to that

integer 65535 is available on the output OUT. The B16IFCVI function is designed for receiving the

integer input from a station computer - for example, over IEC 61850. If the BLOCK input is

activated, it will freeze the logical outputs at the last value.

Values of each of the different OUTx from function block B16IFCVI for 1≤x≤16.

The sum of the value on each INx corresponds to the integer presented on the output OUT on the

function block B16IFCVI.

Name of input

Table continues on next page

Line distance protection REL650

Technical manual

Values (Range)

where 1≤x≤16. The sum of all the values on the activated INx will be available on the

Output value

Output value

PID-1895-OUTPUTSIGNALS v5

ABBD8E241926 v2

PID-1895-MONITOREDDATA v7

SEMOD158425-4 v3.1.1