Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 91

// Selecting the desired RTC
if ( InternalNumberOfDesiredBoard != select_rtc( InternalNumberOfDesiredBoard ) )
{
// Errors which occurred during execution of
ErrorCode = n_get_last_error( InternalNumberOfDesiredBoard );
if ( ErrorCode & 256 )
{
// Here the multi-board command n_load_program_file must be used for initializing the board
// (the single-board command load_program_file( 0 ) would deny execution).
if ( ErrorCode = n_load_program_file( InternalNumberOfDesiredBoard, 0 ) )
{
printf( "n_load_program_file returned error code %d\n", ErrorCode );
}
}
else
{
printf( "No access to RTC5 board with serial number %d\n", SerialNumberOfDesiredBoard );
free_rtc5_dll();
return;
}
if ( ErrorCode )
{
printf( "No access to RTC5 board with serial number %d\n", SerialNumberOfDesiredBoard );
free_rtc5_dll();
return;
}
else
{
// if n_load_program_file was successful, select the desired board
(void) select_rtc( InternalNumberOfDesiredBoard );
}
}
}
®
RTC 5 PC Interface Board
Rev. 1.9 e
6 Developing User Applications
® ®
5 board as the active RTC 5 board for this application
select_rtc
// RTC5_VERSION_MISMATCH
91