Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 334

Control load_jump_table
Command
Function loads a value table with jump delay data points from an ASCII text file (or alternatively
performs automatic determination on the attached scan system) and uses linear
interpolation to create the internal jump delay table for 2D jumps executable in jump
mode.
Call
NoOfDataPoints = load_jump_table( Name, No, PosAck, MinDelay, MaxDelay, ListPos )
Parameters
Name
No
PosAck
MinDelay
MaxDelay
ListPos
Return See load_jump_table_offset.
Notes • The command is identical to
Version info Available beginning with version DLL 525
® ®
4 RTC 5 new command
RTC
Reference load_jump_table_offset
®
RTC 5 PC Interface Board
Rev. 1.9 e
10 Commands And Functions
See load_jump_table_offset.
See load_jump_table_offset.
See load_jump_table_offset.
See load_jump_table_offset.
See load_jump_table_offset.
See load_jump_table_offset.
load_jump_table_offset with Offset = 0.
334