Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 617

Page Name of section / command
570 chapter 14 "Technical Specifications
®
of the RTC 5 PC Interface Board"
573 chapter 14.1 "Compliance with EC
Guidelines for Electromagnetic
Compatibility (EMC)"
573 chapter 14.2 "Compliance with FCC
Rules"
575 "Software" and chapter 15.3.4
and "Installing the Drivers and the RTC
589 Software"
591 chapter 16 "Appendix B: The RTC
Express Board"
385 read_analog_in command
Changes from revision 1.5 to revision 1.6
Page Name of section / command
23 chapter 1.3.1 "Delivered Software"
and further chapters
26 chapter 2.2.2 "Software"
47 "I/O Circuits" for LASER connector
92 chapter 6.9.1 "Free Variables"
114 "Mode 3" for Sky Writing
138 chapter 7.4.8 "Pulse Picking Laser
Mode"
165 chapter 8.3 "Online Positioning"
177 chapter 8.7 "Processing-on-the-fly
(Optional)"
207 chapter 9.1.7 "McBSP Interface"
211 New note about "External List Start"
®
RTC 5 PC Interface Board
Rev. 1.9 e
18 Revision History
Change
Added: Specifications for "SPI / I2C" connector and
"STEPPER MOTOR" connector
Added.
Added.
Warning added: Standby or sleep modes of the operating
®
5 system must be deactivated
®
5- Added.
Added.
Change
®
Added: The RTC 5 software package now includes drivers
for 64-bit WINDOWS operating systems as well as Win32-
and Win64-based DLLs, but no longer the MS Visual Studio
runtime libraries. Note the corresponding comments in
®
"Installing the RTC 5 Software", page
"User Applications and Demo Software", page
"Initialization and Program Start-Up", page 62
"Data Types", page 226.
Added: Requirements for new and older RTC
®
packages (new RTC 5 DLLs need at least WINDOWS XP SP2)
Added.
Added.
Added (as of version DLL 531, OUT 532).
Added.
Change (with version DLL 531, OUT 532): If both memory
locations contain identical data types (with identical bit#31
codings) at the time of the request via
apply_mcbsp_list), then the most recently copied value will
always be used (older DLL/OUT versions always use the value
in memory location 2).
Correction via McBSP interface mit zusätzlicher McBSP-
Eingabe (see new sections
chapter 8.7.5 "Deactivating Processing-on-the-fly
Corrections", page 186)
Added: set_mcbsp_out_ptr
External starts are suppressed after pause_list,
set_wait.
58,
59,
and
®
5 software
apply_mcbsp
page 181 and page 183 and
stop_list
(or
or
617