Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 286

Ctrl Command get_time
Function returns the RTC
save_and_restart_timer
Call
TimerValue = get_time()
®
Result RTC 5 timer value in seconds as a 64-bit IEEE floating point value
Comments • See save_and_restart_timer.
® ®
RTC 4 RTC 5 unchanged
References save_and_restart_timer
®
RTC 5 PC Interface Board
Rev. 1.9 e
10 Commands And Functions
®
5 timer value stored during the most recent call of
286