Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 570

14 Technical Specifications of the RTC
System Requirements
IBM-compatible PC with PCI bus interface
Operating system Microsoft (32 bit or 64 bit)
WINDOWS 8,
WINDOWS 7,
WINDOWS Vista and
WINDOWS XP (SP2 or
higher)
Dimensions
Length 160 mm
Height 100 mm
Interface to Scan System
Connectors Primary scan head
connector SCAN HEAD
(9-pin D-SUB, female)
Secondary scan head
• optionally
connector 2. SCAN HEAD
activated:
(10-pin socket connector)
Signals SL2-100 protocol
XY2-100 protocol via
• optional:
XY2-100 converter
Scan System Control
Number of list buffer up to 3 (configurable)
areas
Capacity of list buffer 1000000 commands
Position update period 10 µs
(microstep period)
Maximum range for – 524288 to +524287
the image field (20-bit signed)
coordinates
Virtual image field – 8388608 to +8388607
(e.g. for Processing- (24-bit signed)
on-the-fly)
®
RTC 5 PC Interface Board
Rev. 1.9 e
14 Technical Specifications of the RTC
®
5 PC Interface Board
®
5 PC Interface Board
Interfaces for the Laser and for Peripheral
Equipment
• LASER Connector
Connector 15-pin D-SUB connector,
female
Laser signals LASER1, LASER2,
LASERON
5 V, active-high or active-
• TTL level
low (programmable)
20 mA
• Max. current load
GND (alternatively: GND2
• Reference
with optional galvanical
decoupling)
Analog outputs ANALOG OUT1,
ANALOG OUT2
• Output voltage
0 V ... 10 V
range
• Resolution 12 Bit
• Max. current load
5 mA
• Reference
GND
Digital input 2 Bits
• LOW level
< 0.6 V
• HIGH level
> 2.3 V
• Max. input voltage
–0.5 V ... +5.5 V
range
• Input resistance > 4.7 k
(pull-up)
• Reference
GND
Digital output 2 bits, buffered
• LOW level
< 0.55 V
> 3.8 V
• HIGH level
20 mA
• Max. current load
• Reference GND
570