Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 164

®
Notes for RTC 4 Users:
®
• For loading RTC 5 correction tables via
load_correction_file, transformation of the
correction tables is not settable.
®
• For the RTC 5, coordinate transformations can
be separately defined for the primary and
secondary scan head connectors. This fulfills the
same purpose as the transformations defined via
®
the RTC 4's load_correction_file
®
• The RTC 5 consequently first executes coordinate
transformations after microvectorization, but
directly before image field correction (with corre-
sponding consequences for the effective jump or
marking speed, as previously mentioned).
®
• The RTC 5 does not support the RTC
coordinate transformations (collectively for both
scan heads) before microvectorization.
®
RTC 5 PC Interface Board
Rev. 1.9 e
8 Advanced Functions for Scan Head and Laser Control
command.
®
4's
164