Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 619

Changes from revision 1.6 to revision 1.7
Page Name of section / command
26 chapter 2.2.2 "Software"
54 chapter 4.4.8 "Analog Inputs"
57 chapter 5.3 "Installing the Drivers"
130 chapter 7.4.2 "Configuring the Laser
Connector (LASER)"
138 chapter 7.4.8 "Pulse Picking Laser
Mode"
149 chapter 7.4.10 "Output
Synchronization"
165 chapter 8.3 "Online Positioning"
187 chapter 8.7.6 "Virtual Image Field"
191 chapter 8.7.10 "Tracking Error
Compensation of Encoder Values for
Processing-on-the-fly Applications"
236 auto_cal command
242 config_laser_signals
263 get_error command
267 get_hex_version
277 get_rtc_version command
311 laser_on_list command
428 set_fly_tracking_error
440 set_laser_control
451 set_mcbsp_freq
454 set_mcbsp_matrix
set_mcbsp_matrix_list
470 set_pulse_picking_length
command
499 set_verify command
523 stop_execution command
Changes from revision 1.7 to revision 1.8
®
RTC 5 PC Interface Board
Rev. 1.9 e
18 Revision History
Change
Added: Notes on new drivers
Added.
Added: Installation under WINDOWS 8 and new section
"Software Driver Upgrade"
Added.
Added: constant pulse length mode
Added.
Added: matrix operation (set_mcbsp_matrix,
set_mcbsp_matrix_list)
Added: Examples of using the virtual image field with
Processing-on-the-fly applications
Added.
Change with version DLL 535: return value 8
command Added (with version DLL 533, OUT 534, RBF 524)
Added with version DLL 535: bits #11, 12, 16
command Change with version DLL 535
Change with version DLL 535
Corrected: changed behavior as of DLL 530, OUT 531,
RBF 522 (as with laser_on_pulses_list)
command Added with version DLL 533, OUT 534, RBF 524
command Added: bit#6 for output synchronization and bit#7 for
constant pulse length mode (with version DLL 530,
OUT 531, RBF 522 and DLL 533, OUT 534, RBF 524)
command Corrected: behavior for out-of-range parameter values
command, Added with version DLL 533, OUT 534, RBF 524
command
Added (with version DLL 533, OUT 534, RBF 524)
Added with version DLL 535: automatic error recognition of
a failed memory request
Change with version OUT 535
619