Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 562

Ctrl Command get_xyz_pos
Support status This RTC
® ®
RTC 4 RTC 5 Replaced by
List Command home_jump
Support status This RTC
Replaced by home_position (see page
List Command laser_on
Support status This RTC
Replaced by laser_on_list (see page 311)
Ctrl Command load_cor
Support status This RTC
Replaced by load_correction_file (see page 328)
Ctrl Command load_pro
Support status This RTC
Replaced by load_program_file (see page 340)
List Command pola_abs, polb_abs, polc_abs
Support status These RTC
Replaced by mark_abs (see page 349)
Ctrl Command read_pixel_ad
Support status This RTC
® ®
RTC 4 RTC 5 There is no equivalent command for the RTC
Ctrl Command rtc3_count_cards / rtc4_count_cards
Support status This RTC
Replaced by rtc5_count_cards (see page 396)
®
RTC 5 PC Interface Board
Rev. 1.9 e
10 Commands And Functions
® ® ®
2/RTC 3/RTC 4 command is not supported by the RTC
get_value (see page 291)
®
2 command is not supported by the RTC
298), the "home jump" is automatically executed.
®
2 command is not supported by the RTC
®
2 command is not supported by the RTC
®
2 command is not supported by the RTC
®
2 commands are not supported by the RTC
® ® ®
2/RTC 3/RTC 4 command is not supported by the RTC
® ®
3/RTC 4 commands are not supported by the RTC
®
5.
®
5.
®
5.
®
5.
®
5.
®
5.
®
5.
®
5.
®
5.
562