Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 105

LaserOn
Delay
Mark
Command
Legend
1 Edgelevel
2 Variable polygon delay, shorter than the specified edgelevel.
3 Variable polygon delay, longer than the edgelevel.
The laser is turned off between the two mark or arc commands.
4 Mark delay.
Laser control timing during a polyline with variable polygon delays.
An edgelevel was defined with the command set_delay_mode.
®
RTC 5 PC Interface Board
Rev. 1.9 e
7 Basic Functions for Scan Head and Laser Control
LaserOff
Delay
1 1
Mark
2 3
Command
LaserOn LaserOff
Delay Delay
Last Mark
Command
4
In This Polyline
Time
35
105