Upgrading Rtc ® 5 Boards - Scanlab RTC 5 PC Interface Board Installation And Operation Manual

®
5.8 Upgrading RTC 5 Boards
®
If you replace an already installed RTC 5 board with
a newer one, then you must also perform a software
®
update. This is particularly important when RTC 5
®
boards with DSP version 0 get replaced by RTC 5
boards with DSP version 2 (see get_rtc_version bits
#16-23). The delivered product CD has the latest
versions of software files. You can also download the
newest files from SCANLAB's website.
®
60
RTC 5 PC Interface Board
Rev. 1.9 e
5 Installation And Start-Up