Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 277

Ctrl Command get_rtc_mode
Function returns the currently set operation mode of the RTC
Call
DLLMode = get_rtc_mode()
Result DLL operation mode as a 32-bit value:
= 4:
= 5:
Comments • The DLL operation mode can be set via
page
• The get_rtc_mode command is also available without explicit access rights to a partic-
ular RTC
• get_rtc_mode is not available as a multi-board command.
• The board-specific error variables LastError and AccError (see
87) are neither generated nor altered by get_rtc_mode.
® ®
RTC 4 RTC 5 new command
References set_rtc4_mode,
Ctrl Command get_rtc_version
Function returns the version number of the RTC
information about enabled options of the RTC
Call
RTCVersion = get_rtc_version()
®
Result RTC 5 version number as an unsigned 32-bit value:
Bit #0 (LSB) ... Bit #7
Bit #8
Bit #9
Bit #10
Bits #11...#15
Bits #16...#23
Bits #24...#31
Comments • The RTC
(bit#0...7) returns values in the range 0 ... 99 (version number - 500).
• The current DSP version number is 2 (0 and 1 are older versions).
• The current firmware subversion is 0.
• For DLL 535 and higher: The firmware version can also be returned after an
RTC5_VERSION_MISMATCH or RTC5_ACCESS_DENIED error. The return value is 0 if no
program has yet been loaded. Here, an RTC5_TIMEOUT error will not be generated.
® ®
RTC 4 RTC 5 unchanged functionality
Version info Change with version DLL 518, OUT 517: bits#16...23
Last change with version DLL 535: bits#24...31 (also see comment)
References get_hex_version,
®
RTC 5 PC Interface Board
Rev. 1.9 e
10 Commands And Functions
®
RTC 4 compatibility mode
®
RTC 5 mode (default setting)
473. The default setting is RTC
®
5 board.
set_rtc5_mode
Firmware version of the RTC
= 1: The Processing-on-the-fly option is enabled (see
= 1: The "second scan head control" option is enabled (see
= 1: The 3D option is enabled (see
reserved
DSP version number
Firmware subversion of the RTC
®
5 firmware version numbers are in the range 500 ... 599. get_rtc_version
get_dll_version
®
5 DLL
set_rtc4_mode, page 473
®
5 mode.
®
5 firmware (RTC5RBF.rbf) and additional
®
5 board
®
5 board
page
page 171).
®
5 board
or set_rtc5_mode,
"Error Handling", page
177).
page 41).
277