Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 590

15.4 Technical Specifications of
®
RTC 5 PC/104-Plus Board
System Requirements
PC/104-Plus CPU board
+ free position in the PC/104 stack
Operating system Microsoft (32 bit or 64 bit)
WINDOWS 8,
WINDOWS 7,
WINDOWS Vista and
WINDOWS XP (SP2 or
higher) and
WINDOWS XP Embedded
(SP2 or higher)
Dimensions
Length x Width 96 mm x 93.5 mm
Stack height 16.8 mm
Max. component 9.3 mm
height
Weight
approx. 115 g
Operating and Storage Conditions
Operating +15 °C to +60 °C
temperature
Storage temperature – 20 °C to +60 °C
Environmental non-condensing
conditions non-corrosive
®
RTC 5 PC Interface Board
Rev. 1.9 e
®
15 Appendix A: The RTC 5 PC/104-Plus Board
Connectors to PC/104-Plus CPU board (or to
PC/104-Stack)
PC/104-Plus PCI bus 120-pin stack-trough
connectors incl. shroud,
operating voltage: +5 V
ISA bus 104-pin stack-through
connectors incl. socket for
passing through the
signals and +5 V power
supply
Other connectors (signal specifications
®
identical to RTC 5 PC interface board)
Interface to SCANHEADS connector
scan system (20-pin box header) with
primary and secondary
scan head connection
(secondary scan head
control is only optionally
activated)
Interfaces for laser and LASER connector (16-pin
peripheral equipment box header)
MULTI multifunction
connector (100-pin box
header)
590