Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 360

Normal mark_serial_abs
List Command
Function marks the current serial number of the serial-number-set most recently selected via
select_serial_set_list
format at the current position. In the called indexed text strings or characters (see below),
any absolute vector and arc commands will receive an offset (based on the current coor-
dinates at the time of the call). Afterward the serial number is (optionally) automatically
incremented.
Call
mark_serial_abs( Mode, Digits )
Parameters
Mode
Digits
Comments • The mark_serial_abs command works like mark_serial; however, internal calling of the
indexed text strings (or characters) is via
command lists of the called indexed text strings (or characters) contain no absolute
commands, then there is no difference between mark_serial_abs and mark_serial.
® ®
RTC 4 RTC 5 new command
References mark_serial
®
RTC 5 PC Interface Board
Rev. 1.9 e
10 Commands And Functions
(or of serial-number-set 0 after load_program_file) in the selected
See mark_serial.
See mark_serial.
list_call_abs instead of list_call. If the
360