Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 601

17.2 Layout and Interfaces
17.2.1 Connectors and Jumper Posi-
tions
Figure 71 and figure 72 on page 602
tions of the connectors and jumpers on the front and
9.52
B1
B2
A1
A2
MARKING ON THE FLY
(optional)
SLAVE
Legend
SCANHEADS . . . . . . . . . . . Primary and secondary scan head connection (20-pin box header, double-row,
LASER . . . . . . . . . . . . . . . . Laser connection and digital and analog output ports (16-pin box header,
MULTI . . . . . . . . . . . . . . . . Multifunction connector with a 16-bit digital input, a 16-bit digital output, an
PCI-Express . . . . . . . . . . . . PCI-Express- (156-pin, see
SLAVE . . . . . . . . . . . . . . . . 6-pin SLAVE connector (see
MARKING ON THE FLY . . . . optional 16-pin box header (double-row, 2.54 mm pitch) with encoder inputs
®
Layout and dimensions of the RTC
®
RTC 5 PC Interface Board
Rev. 1.9 e
®
17 Appendix C: The RTC 5 PCIe/104 Board
show the posi-
1
2
71.12
MULTI
19
20
LASER SCANHEADS
5.08
90.8
95.88
2.54 mm pitch, pin-out page
optionally activated.
double-row, 2.54 mm pitch, pin-out
8-bit digital output, encoder inputs for Processing-on-the-fly applications, etc.
(100-pin box header, double-row, 1.27 mm pitch, pin-out
for Processing-on-the-fly applications (pin-out
5 PCIe/104 board (top: side view, bottom: front side)
®
back side of the RTC 5 PCIe/104 board. All
connectors and jumper settings are described in
detail in the following sections.
1
2
15.24
PCI-Express
1
2
579); secondary scan head control is only
page 580)
page 579)
"Master/Slave Synchronization", page
page 51)
page 580)
579)
71
601