Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 529

Ctrl Command sync_slaves
Version info • Available beginning with version DLL 515, OUT 514, RBF 512
• Updated with version DLL 518, OUT 517, RBF 515: enhanced master/slave synchroniza-
tion (see
• Updated with version DLL 523, OUT 524: also triggers matching of short-command
counts when necessary (see
References get_master_slave,
Normal time_fix
List Command
Function stores the current time and date of the RTC
mark_date
Call
time_fix()
Comments • The command time_fix is synonymous with
Offset = 0 (see comments there).
® ®
RTC 4 RTC 5 unchanged
(the command was previously only available for the RTC
standalone version of the RTC
Version info Last change with version OUT 517
References time_fix_f,
Normal time_fix_f
List Command
Function stores the current time and date of the RTC
mark_date
Call
time_fix_f( FirstDay )
Parameter
FirstDay
Comments • The command time_fix_f is synonymous with
comments there).
® ®
RTC 4 RTC 5 new command
Version info Last change with version OUT 517
References time_fix_f, time_fix_f_off, time_update, mark_time,
®
RTC 5 PC Interface Board
Rev. 1.9 e
10 Commands And Functions
page 611); we recommend only using the updated version of the command.
page 84).
get_sync_status
and mark_time.
®
4 board)
time_fix_f_off
and mark_time.
See time_fix_f_off.
®
clock/calender in a buffer for use with
time_fix_f_off with FirstDay = 0 and
®
SCANalone Board, i.e. the
®
clock/calender in a buffer for use with
time_fix_f_off with Offset = 0 (see
mark_date
529