Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 279

Ctrl Command get_standby
Function returns the currently set standby parameters.
Call
get_standby( &HalfPeriod, &PulseLength )
Returned
HalfPeriod
parameter
values
PulseLength
Comments • For usage of this command, see
® ®
RTC 4 RTC 5 new command
®
In RTC 4 compatibility mode, the RTC
1/8 µs).
Version info Available beginning with version DLL 515, OUT 514, RBF 512
References set_standby
®
RTC 5 PC Interface Board
Rev. 1.9 e
10 Commands And Functions
half of the currently set standby output period of the standby pulses as a
pointer to an unsigned 32-bit value (1 bit equals 1/64 µs).
currently set pulse length of the standby pulses as a pointer to an
unsigned 32-bit value (1 bit equals 1/64 µs).
page 129.
®
5 divides the parameter values by 8 (1 bit equals
279