Scanlab RTC 5 PC Interface Board Installation And Operation Manual page 411

Ctrl Command set_char_table
Function stores the absolute start address of a command list in the internal management table for
indexed text strings.
Call
set_char_table( Index, Pos )
Parameters
Index
Pos
Comments • The command is synonymous with set_text_table_pointer.
® ®
RTC 4 RTC 5 unchanged functionality (except for the extended range of values)
(the command was previously only available for the RTC
standalone version of the RTC
References set_text_table_pointer
®
RTC 5 PC Interface Board
Rev. 1.9 e
10 Commands And Functions
Index of the indexed text string whose starting address Pos should be entered
in the management table (as an unsigned 32-bit value, allowed range:
[0 ... 41]). The same ordering applies as for the
= 0... 9: digits for marking the time and date [0 ... 9]
= 10...21: months [January ... December]
= 22...28: days-of-the-week [Sunday ... Saturday]
= 29: blank character for marking serial numbers
= 30...39: digits for marking serial numbers [0 ... 9]
= 40: text for "a.m."
= 41: text for "p.m."
Absolute start address as an unsigned 32-bit value;
20
allowed range: [0 ... (2 –1)]
®
4 board)
load_text_table command:
®
SCANalone Board, i.e. the
411